(more pics at bottom of page)
The DSR-1800 is the successor
model to the DSR-80. Implementing the innovative, high standard technology featured
in the DSR-2000, the DSR-1800 boasts improved jog audio, slow motion and editing
performance. Two major features of these models are the built-in jog/search
dial and its multiple format playback capability of DV (SP only) and DVCPRO
25. This unit has the ability to automatically accommodate all 25 Mbps cassette
sizes, and does not require a cassette adapter or menu setting changes for playback
of these formats.
The DSR-1800 also has a full range of both analog and digital interfaces. The
availability of the SDI interface ensures a migration path to Digital Betacam,
Betacam SX and SDI-based systems. The SDTI (QSDI) interface enable a quality
deterioration-free transfer between the DSR-1800 and DV compression-based systems.
One new option for this line is the i. LINK™ IEEE-1394 DV I/O connection capability,
which is useful for transferring digital video between the DSR-1800 and compatible
DV I/O equipped cameras, VTRs and nonlinear editing systems.
The DSR-1800 is the successor model to the DSR-80. Implementing the innovative,
high standard technology featured in the DSR-2000, the DSR-1800 boasts improved
jog audio, slow motion and editing performance. Two major features of these
models are the built-in jog/search dial and its multiple format playback capability
of DV (SP only) and DVCPRO 25. This unit has the ability to automatically accommodate
all 25 Mbps cassette sizes, and does not require a cassette adapter or menu
setting changes for playback of these formats.
The DSR-1800 also has a full range of both analog and digital interfaces. The
availability of the SDI interface ensures a migration path to Digital Betacam,
Betacam SX and SDI-based systems. The SDTI (QSDI) interface enable a quality
deterioration-free transfer between the DSR-1800 and DV compression-based systems.
One new option for this line is the i. LINK™ IEEE-1394 DV I/O connection capability,
which is useful for transferring digital video between the DSR-1800 and compatible
DV I/O equipped cameras, VTRs and nonlinear editing systems.
Features
PCM Digital Audio:
The DSR-1800 provides excellent PCM digital audio performance
with a wide dynamic range and an excellent signal-to-noise ratio. There are
two selectable audio recording modes: 2CH mode with 48 kHz/16-bit or 4CH mode
with 32 kHz/12-bit.
Playback Compatibility with DV (25 Mbps) Formats:
The DSR-1800 offers excellent playback compatibility with
DV family formats (25Mbps). The DV family formats include DVCAM, DV (SP mode
only) and DVCPRO 25*. These tapes can be played back and utilized directly as
editing materials with +/-0 Frame accuracy.
*Playback signal of DVCRO recorded tape is not available via SDTI(QSDI) and
i.LINK interfaces.
Triple-positioning Cassette Compartment:
Triple-positioning cassette compartment automatically
accepts DVCPRO M-size cassette tapes in addition to standard and mini size cassette
tapes of DV, DVCAM and DVCPRO. Cassette insertion is done without the need for
an external adapter, or the need to set the playback format mode before use.
Built-in Jog/Shuttle Dial:
A highly responsive Jog/Shuttle dial is built in on the
front panel. This feature is ideal for searching for desired edit points.
Digital Slow Motion and Jog Sound:
The DSR-1800 offers a variable speed playback function
with a range of -0.5 to +0.5 times normal speed. Play back of digital noiseless
slow motion pictures and jog sound is also possible within this range. This
enables the fast and accurate locating of edit pointson the tape. This feature
is available for all DV (25Mbps) format recorded tapes.
Frame Accurate Editing:
The DSR-1800 is equipped with an RS-422A remote
control connection to interface with the other compatible equipment. i.LINK
based control is also available by installing the DSBK-1803 board. Frame accurate
editing is possible through either interface.
DMC (Dynamic Motion Control):
By utilizing a DMC-capable editing controller, the DSR-1800
can vary the playback speed for a certain section of a tape in the range of
-0.5 to +0.5 times normal speed. Segments can be stored in memory for playback
at the same speed. NOTE: DMC is not available through i.LINK and SDTI(QSDI)
due to minute speed video data processing capability.
Clip Link Operation:
By integrating the DSR-1800 into a non-linear
editing (NLE) system which supports ClipLink operation, the VTR is able to send
ClipLink information data onto the NLE unit, providing great efficiency throughout
the editing process.
Process Control (Video Control):
The DSR-1800 is equipped with Process Control for both
analog and digital outputs in order to obtain highly stable video signals. With
Process Control, the video level, chroma level, hue, Y/C delay Sync phase, SC
phase and Set up (black) for composite, S-video, component and SDI outputs can
be controlled through the VTR menu. These features can also be adjusted from
an external TBC remote controller through Video Control port (D-sub 15-pin)
on the rear panel.
VITC Time Code:
The DSR-1800 supports time code in the sub code
area on a tape, and also VITC through all video signal interfaces. This time
code is recorded on the video tracks. VITC output is achieved by inserting the
signal into the vertical-blanking interval. The time code in sub code area can
also be output as VITC.
Audio Editing Capabilities:
Audio cross-fade function is available for noiseless audio
transitions at editing points. Audio mix/swap and voice-over functions are possible
without any delay between the video and studio signals. In addition, all four
audio channels can be edited independently, which is applicable in creating
or editing video material in multiple languages, or implementing multiple audio
sources.
Built-in Signal Generator:
The DSR-1800 is equipped with a built-in signal generator,
which can generate color bars or black burst for video, and 1 kHz tone or mute
signal for audio. This is very convenient for creating pre-striped tapes before
editing.
Universal Powering System:
The DSR-1800 is equipped with a universal powering system
that can accommodate AC 100V to 240V, 50 or 60 Hz . A built-in regulator switches
the unit to the appropriate voltage automatically. This allows the DSR-1800
to be used worldwide without the need for a transformer.
Auto Repeat Function:
Auto repeat function is available through the VTR menu.
Time code can also be set as start and stop points.
Channel Condition Monitoring:
The DSR-1800 has a three-color channel condition indicator,
with each color representing a particular error rate threshold level. This function
enables operators to quickly recognize the condition of a VTR or tape for more
reliable editing operation.
DVCAM Digital Component Recording Format:
The DVCAM format uses 8-bit digital component
recording with a 5:1 compression ratio and a sampling rate of 4:1:1. The DV
compression algorithm provides excellent picture quality and superb multigenerational
performance.
Specifications
Power requirements:
AC 100-240V, 50/60 Hz
Power consumption:
Approx. 100 W (DSR-1800 with all option boards)
Dimensions (WxHxD):
16 7/8" x 7 x 19 5/8 inches
Weight:
28 lb. 10 oz
Operating temperature:
32°F to 104°F
Storage temperature:
-4°F to 140°F
Operating relative humidity:
Less than 80%
Storage relative humidity:
Less than 90%
Tape speed:
28.193 mm/s
Recording/playback time:
Standard size: More than 184 min. with PDV-184ME
Mini size: More than 40 min. with PDVM-40ME
FF/REW time:
Standard size: Less than 3 minutes
Mini size: Less than 1 minutes
Search speed:
Max. 85 times normal speed, forward and reverse via RS-422A
Ref. Video Input:
BNC x 2, loop-through connection
0.286 Vp-p, 75W, sync negative
Composite Input:
BNC x 2, loop-through connection
Composite, 1.0 Vp-p, 75W, sync negative
Component Input:
BNC x 3
Luminance: 1.0 Vp-p, 75W, sync negative
Chrominance R-Y: 0.7 Vp-p, 75W
B-Y: 0.7 Vp-p, 75W
S-Video Input:
DIN 4pin x 1
Y: 1.0 Vp-p, 75W, sync negative
C: 0.286 Vp-p, 75W (at burst level)
SDI Input(using DSBK-1801 optional board):
BNC x 2
Conforms to SDI (270 Mbps), SMPTE 259M
SDTI(QSDI) Input (using DSBK-1802 optional board):
BNC x 1
Conforms to SDTI (270 Mbps), SMPTE 305M/322M
i.LINK (DV In/Out) (using DSBK-1803 optional board):
6pin x 1
IEEE-1394-based (100 Mbps)
Audio Input:
XLR 3-pin female x 4
AES/EBU Input (using optional DSBK-1801):
BNC x 2
Conforms to AES-3id-1995
Time Code Input:
BNC x 1
Ref. Video Output:
BNC x 1
0.286 Vp-p, 75W, sync negative
Composite Output:
BNC x 2
Composite, 1.0 Vp-p, 75W, sync negative
Component Output:
BNC x 3
Luminance: 1.0 Vp-p, 75W, sync negative
Chrominance R-Y: 0.7 Vp-p, 75W
B-Y: 0.7 Vp-p, 75W
S-Video Output:
DIN 4pin x 1
Y: 1.0Vp-p, 75W, sync negative
C: 0.286Vp-p, 75W (at burst level)
SDI Output (using DSBK-1601 for DSR-1600):
BNC x 2, active-through
Conforms to SDI (270 Mbps), SMPTE 259M
SDTI (QSDI) Output (using DSBK-1602 for DSR-1600):
BNC x 1
Conforms to SDTI (270 Mbps), SMPTE 305M/322M
i.LINK connection (DV In/Out) (using DSBK-1803 optional board):
6-pin x 1
IEEE-1394-based (100Mbps)
Audio Output:
XLR 3-pin male x 4
Audio Monitor Output:
RCA Phono jack x 1
Headphone Output:
JM-60 stereo phone jack x 1
AES/EBU Output:
BNC x 2
Conformed to AES-3id-1995
Time Code Output:
BNC x 1
RS-422A:
D-sub 9-pin x 1
Video Control:
D-sub 15-pin x 1
Control S (SIRCS):
Stereo mini jack x 1