| UVW1200 is a Betacam SP Player that features built-in time base stabilizer, built-in time code reader, 90 minute playback, 16 times picture search, RS-232C remote interface, composite output, Y/C composite output, switchable component (Y, R-Y, B-Y) or RGB outputs. |
 |
Long operating time |
|
High Quality Audio |
|
Dolby C-type Noise Reduction System |
|
High Speed Picture Search 5 times normal speed in color, and up to 16 times normal speed in monochrome—both in forward and reverse. |
|
Built-in Time Base Stabilizer Provides stable pictures without additional equipment. |
|
Built-in Time Code Reader |
|
Serial 2-pin Remote Control Interface Complied with RS-232C. |
|
RGB and Y/R-Y/B-Y Component Video Signal Output |
|
Composite Video Signal Outputs |
|
S-Video Signal Output |
|
Feature |
Benefit |
||
|
Long Operating Time
|
Accepts both S-size and L-size cassettes, offering operating times of up to 30 minutes and over 90 minutes respectively.
| |
|
High Quality Audio
|
Two longitudinal audio channels are provided. The high tape speed (118.6 mm/s) of the format and the adoption of the proven Dolby C-type Noise Reduction System provides the UVW1200 offers high quality audio with a wide dynamic range; even at high frequencies, there is minimum distortion and an excellent signal-to-noise ratio.
| |
|
High Speed Picture Search
|
The high speed picture search provides a recognizable picture at various speeds over a range of up to five times normal speed in color, and up to 16 times normal speed in monochrome, both in forward and reverse.
| |
|
Built-in Time Base Stabilizer
|
Provides stable pictures without additional equipment. Advanced, high quality digital dropout compensation also ensures consistent picture performance.
| |
|
Built-in Time Code Reader
|
The Betacam SP format has an independent time code track; therefore, a longitudinal audio track does not have to be sacrificed for time code. A time code reader is built into the UVW1200. The time codes conform to the SMPTE standard, in which LTC and User-bits are provided. LTC is used to identify the absolute address of a frame, while User-bits are reserved for operator's use.
|
|
Specification |
Detail |
||
|
Power requirements
|
AC 90 to 132 V, 48 to 64 Hz
| |
|
Power consumption
|
63W
| |
|
Operating temperature
|
5C to 40C(41F to 104F)
| |
|
Humidity
|
Less than 80%(relative humidity)
| |
|
Tape speed
|
118.6mm/s
| |
|
Playback time
|
More than 90 min with UVWT-90MLA | |
|
Fast forward time
|
Less than 3 min with UVWT-90MLA
| |
|
Rewind time
|
Less than 3 min with UVWT-90MLA
| |
|
S/N ratio
|
Luminance (Component OUT) More than 49dB | |
|
Y/C delay
|
Less than 30 ns
| |
|
Frequency response
|
50 Hz to 12.5 kHz +2.0/-3.0 dB
| |
|
Wow and flutter
|
Less than 0.18% rms
| |
|
S-VIDEO OUT
|
Y: 1.0 Vp-p,75 | |
|
REMOTE IN/OUT
|
25-pin female complied with RS-232C
| |
|
HEADPHONES
|
JM-60 headphone stereo jack
| |
|
CONTROL/S
|
Mini jack
| |
|
GENERAL:
|
| |
|
Search speed(with optional SVRM-100)*1
|
SHUTTLE 15 steps, still to 16 times normal speed, forward and reverse | |
|
VIDEO PERFORMANCE:
|
| |
|
Bandwidth
|
Luminance (50% modulation) 30Hz to 4.0 MHz +1.0/-4.0 dB | |
|
K-factor(2Tpulse)
|
Less than 3%
| |
|
AUDIO PERFORMANCE (Metal Particle Tape):
|
| |
|
S/N ratio(at 3% distortion level)
|
More than 70 dB
| |
|
Distortion T.H.D.(at 1kHz reference level)
|
Less than 1.5%
| |
|
SIGNAL INPUTS:
|
| |
|
REF VIDEO IN(BNC)
|
1.0Vp-p, 75
| |
|
SIGNAL OUTPUTS:
|
| |
|
VIDEO OUT 1(BNC)
|
Composite video, 1.0 Vp-p, 75, sync negative
| |
|
VIDEO OUT 2(BNC)
|
Composite video, 1.0 Vp-p, 75, sync negative, with or without character insertion
| |
|
RGB/Component Out (BNCx3)
|
Y/Sync on G 1.0Vp-p, 75, sync negative | |
|
AUDIO LINE OUT (XLR 3 pin male) |
+4dBu*2,600,balanced
| |
|
AUDIO MONITOR OUT(Phono)
|
| |
|
CH 1/2
|
-6 DbU
|