 |
 |
||
 |
|||
|
|
|||
 Switchers/Option
Cards/Edit |
|
Qty.
|
Model
|
List Price
|
Your Price
|
Savings
|
Description
|
| 3 | Sony BKPF-L601C /B |
$2,300 | $1,375 | 40% | The BKPFL601C is an A to D converter board which converts a 525 or 625-line component analog video signal to a component serial digital video signal. Y, B-Y, R-Y, or RGB signals can be input. Four distribution outputs of the converted signal are provided. |
| 70 | BKPF-L606 /B | $1,760 | $1,050 | 40% | A/V Demultiplexer that extracts AES/EBU format digital audio signals from a multiplexed 525/625 component serial or NTSC composite serial digital video signal. A single BKPFL606 board will extract two AES/EBU stereo pairs (four audio channels). Up to eight AES/EBU stereo pairs (16 audio channels) can be separated from a 525/625 component serial digital video signal by cascading four BKPFL606 boards. THE BKPFL606 distributes an input serial digital video signal to four outputs and each of two extracted AES/EBU stereo pairs to four outputs. |
| 12 | BKPF-L608C /B | $1,780 | $1,050 | 41% | The BKPFL608C is a 4:2:2 frame/line synchronizer board used to synchronize a 4:2:2 Component serial digital (SDI) video input signal to an external analog reference. This 10-bit, serial 4:2:2 synchronizer features, a Freeze control that has field/frame and auto/manual selection. Phase adjustment is also provided. The selection of frame sync or line sync mode solves timing problems in a component serial digital environment. Up to eight embedded audio channels can be passed. Four (SDI) distribution outputs are provided. BKPF-L Series modules install in the PFV-L Series Interface Units in any Combination with other BKPF-L Series function boards. |
| 1 | BKPF-L611 /B | $1,380 | $820 | 41% | 3 Ch. SDI Distributor Board. Installs as option into PFV-L02 and PFV-L10 frames. It accepts any component or composite serial digital video signal. Can operate at bit rates of up to 540 Mbps (143, 177, 270, 360, and 540 Mbps serial formats) and can be used for DVB/ASI signal distribution. BKPFL611 |
| 17 | BKPF-L613C /B | $1,010 | $650 | 36% | SDI DA with Analog Video Monitoring output board for use in the PFV-L10 frame. Provides distribution of SDI component input signals to qty.. 4 outputs. Also converts the SDI component input signal to qty. 4 analog video (either NTSC or PAL) outputs or qty. 1 Y, R-Y or B-Y output or qty. 1 R, G.B and qty. 1 composite video output. Input signal has loop-thru capability. Conforms to ISR (Interactive Status Reporting) for diagnostics and error reporting. BKPFL613C |
| 4 | BKPF-L641 /B | $3,410 | $1,975 | 42% | The BKPF-L641 is a module used to convert an NTSC or PAL composite analog signal into a 4:2:2 component serial digital (SDI) video output. This decoder features 10-bit digital internal processing, a three-line adaptive comb filter, and frame synchronizer. In conjunction with the BKPF-L642 4:2:2 to NTSC/PAL encoder module, a color frame ID insert function avoids reverse color framing errors in the encode/decode chain. Content of the VBI is also maintained. An internal test signal generator is included for maintenance purposes. BKPF-L Series modules install in the PFV-L Series Interface Units in any Combination with other BKPF-L Series function boards. BKPFL641 |
| 18 | BKPF-L642 /B | $2,150 | $1,300 | 40% | The BKPF-L642 is an encoder module used for conversion of component 4:2:2 serial digital (SDI) to NTSC or PAL composite analog. This module features 10-bit processing, 2 times over sampling, and a line synchronizer. In conjunction with the BKPF-L641 4:2:2 to NTSC/PAL decoder module, the color frame ID extractor function avoids the reverse color frame errors that may be generated by the encode/decode chain. Ancillary data within the VBI is also passed, and an internal test signal generator is provided for easy maintenance, Using 10-bit conversion, the BKPFL642 is ideal for quality-critical applications such as distribution or on-air transmission. |
| 1 | BKPF-L704 /B | $1,350 | $820 | 39% | Analog I/O black burst regenerator board. NTSC Composite analog input with passive loop-through. Six black burst outputs. Can be used in a mixed analog/digital system, delaying the sync signal to the analog equipment to compensate for the longer video delay of the digital equipment. Installs as option into a PFV-L Series Interface Unit. BKPFL704 |
| 26 | BKPF-L751 /B | $1,410 | $850 | 40% | Audio A/D Converter Board. Installs as option into PFV-L10 frame. The BKPF-L751 is a dual channel audio analog to digital converter board that accepts up to two analog audio stereo inputs and converts them into two AES/EBU format outputs. The signals carried by the two AES/EBU outputs can be interchanged. Conversion is at a resolution of 24 bits and at a sampling frequency of 48 kHz. Either a video reference (NTSC, PAL or HD) or a 48 kHz audio word clock can be used as a reference signal. A word clock output is available by setting an internal switch on the board so that other cascade-connected BKPFL751 boards can be operated synchronously. |
| 75 | HKPF-SP003 /B | $2,170 | $1,300 | 40% | HKPF-SP003 digital video distribution amp installs into the PFV-SP3300. Accepts HD or SD input and distributes it to six outputs. Features auto equalization up to 100m (at 1.5 Gbps); re clocking at 143M/177M/270M/ 360M/540M/1.5Gbps. Also features auto bit rate detection. |
| 7 | HKPSU03 /B | $950 | $575 | 39% | Backup Power Supply Unit for PFV-SP3300, MKS-8700, CCP series |
| 12 | HKS-5810SD /B | $3,030 | $1,750 | 42% | HKS5810SD input board set for the HDS-X5800. Provides 33 inputs for serial digital signal with data rates of up to 360 Mb/s. |
| 12 | HKS-5830SD /B | $15,200 | $8,500 | 44% | HKS5830SD matrix board for the HDS-X5800. |
| 7 | HKS-5860SD /B | $2,350 | $1,400 | 40% | HKS5860 SD Output board for HDS-X5800. Provides 34 outputs for serial digital signal with data rates of up to 360 Mb/s. |
| 1 | HKSP-105 /B | $4,740 | $2,740 | 42% | The HKSP-105 is a video/audio multiplexer board that multiplexes four AES/EBU format digital audio signals (8 channels) with an HD SDI video signal. Two outputs of the multiplexed signal are provided. By cascading two HKSP105 boards, a further four AES/EBU signals can be multiplexed onto one HD SDI signal, making a total of eight pairs/sixteen channels. Installs in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. |
| 4 | HKSP-106 /B | $4,740 | $2,740 | 42% | The HKSP-106 is a video/audio de-multiplexer board that de-multiplexes four AES/EBU-format digital audio signals from a multiplexed HD SDI signal. The HD SDI input signal is distributed to two outputs. Up to eight pairs/sixteen channels of audio can be separated from a multiplexed HD SDI signal by connecting two HKSP106 boards in cascade. Installs in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. |
| 2 | HKSP-1125 /B | $8,920 | $4,800 | 46% | The HKSP-1125 is a 525-line or a 625-line to 1125i or 720P up-converter with an auto colorimetry selection capability and selectable output modes. The HKSP1125 accepts inputs in conventional NTSC composite analog or NTSC composite serial digital or 525/625 component serial digital signal format, and provides three HD serial digital outputs to the 1125i or 720P interlaced HDTV standard. The 1125 output can be in the 1035 or 1080 active line format. The HKPF-SP/HKSP function boards install in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. |
| 1 | HKSP-300 /B | $3,140 | $1,900 | 39% | The HKSP-300 processing module controller is installed in the PFV-SP series signal processing units, and controls the HKSP function boards accommodated within the same processing units can be controlled from a UCP-8060 universal control panel over an Ethernet-based network. A redundant CPU is available by installing two HKSP300 boards. The set-up data backup function retains the settings of the function boards when they have been exchanged. Set-up for networking can be carried out through a connected PC. The HKPF-SP/HKSP function boards install in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. |
| 1 | HKSP-313 /B | $9,150 | $5,100 | 44% | The HKSP-313 color corrector board provides control of various color control parameters for different types of signal and complies with multiple HD formats. It also provides line conversion between 1035 and 1080, and format conversion between 1080 and 720P. The HKPF-SP/HKSP function boards install in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. HKSP313 |
| 22 | HKSP-525 /B | $8,420 | $4,900 | 42% | The HKSP-525 down converter board converts an HD SDI signal to an SD SDI signal. It accepts an HD SDI input with embedded audio, and provides three SD SDI outputs (525/625) with embedded audio, plus an analog monitor output. The HKPF-SP/HKSP function boards install in PFV-SP Series Signal Processing Units in any combination with other HKPF-SP/HKSP function boards. HKSP525 |
| 8 | PFV-SP3300 /B | $5,260 | $2,950 | 44% | The PFV-SP3300 is a Compact 3 RU frame that houses up to 17 HKPF / HKSP series modules. |
| 7 | VCS-700 /B | $5,160 | $3,100 | 40% | The VCS700 monitoring switcher provides 6 input composite signal switching for monitoring of both waveform and video of the BVP-900/700/500 and HDC Series camera systems. |